The Laminating Process

The basic lamination process is a relatively simple one, although there are many variables. First, a thin film of adhesive is spread on a Mylar film. Then the Mylar and the base fabric, be it a scrim or a woven fabric, are passed between heated rollers that both set off the adhesive and force the adhesive into the fibers. If the fabric calls for more than two layers, the

Mylar film, covered with adhesive, and a base fabric are passed between heated rollers that set off the adhesive and bond the two surfaces.

Mylar film, covered with adhesive, and a base fabric are passed between heated rollers that set off the adhesive and bond the two surfaces.

Was this article helpful?

0 0
Boating Secrets Uncovered

Boating Secrets Uncovered

If you're wanting to learn about boating. Then this may be the most important letter you'll ever read! You Are Going To Get An In-Depth Look At One Of The Most Remarkable Boating Guides There Is Available On The Market Today. It doesn't matter if you are just for the first time looking into going boating, this boating guide will get you on the right track to a fun filled experience.

Get My Free Ebook


Post a comment